UART

uart7: serial@99c000 {
    compatible = "qcom,geni-uart";
    reg = <0 0x0099c000 0 0x4000>;
    clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
    clock-names = "se";
    pinctrl-names = "default";
    pinctrl-0 = <&qup_uart7_cts>, <&qup_uart7_rts>,
                <&qup_uart7_tx>, <&qup_uart7_rx>;
    interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
    power-domains = <&rpmhpd SA8295P_CX>;
    interconnect-names = "qup-core", "qup-config";
    status = "disabled";
};

// 4-wire HS UART
{ QUPV3_0_SE7, QUPV3_PROTOCOL_UART_4W, QUPV3_MODE_FIFO, AC_HLOS, TRUE, TRUE, FALSE }

// 2-wire UART (no flow control)
{ QUPV3_0_SE5, QUPV3_PROTOCOL_UART_2W, QUPV3_MODE_FIFO, AC_HLOS, TRUE, FALSE, FALSE }

CONFIG_QCOM_GENI_SE=y
CONFIG_SERIAL_QCOM_GENI=y

+serial1 = &uart7;

+&uart7 {
+    status = "ok";
+};

mount -t debugfs none /sys/kernel/debug
echo -n "file qcom_geni_serial.c +p" > /sys/kernel/debug/dynamic_debug/control
echo -n "file serial_core.c +p" > /sys/kernel/debug/dynamic_debug/control
dmesg | grep -i uart
dmesg | grep ttyHS