IMCL SPM Intent API - Qualcomm Dragonwing Documentation

Header: spf/api/modules/imcl_spm_intent_api.h

Macros

`INTENT_ID_AUDIO_DAM_DETECTION_ENGINE_CTRL`

Intent defines the payload structure of the IMCL message.

#define INTENT_ID_AUDIO_DAM_DETECTION_ENGINE_CTRL 0x08001064

`INTENT_ID_FFECNS_SVA_FREEZE`

#define INTENT_ID_FFECNS_SVA_FREEZE 0x080010BA

`INTENT_ID_AVC`

Intent ID for the control link between AVC Tx and Rx module.

#define INTENT_ID_AVC 0x080010DB

`INTENT_ID_DRC_CONFIG`

Intent ID to send DRC parameters over control link.

#define INTENT_ID_DRC_CONFIG 0x080010F3

`INTENT_ID_GAIN_INFO`

Intent ID for the control link to send gain information.

#define INTENT_ID_GAIN_INFO 0x080010F5

`INTENT_ID_P_EQ_VOL_HEADROOM`

#define INTENT_ID_P_EQ_VOL_HEADROOM 0x08001118

`INTENT_ID_RVE`

Intent ID for the control link between RVE Tx and Rx module.

#define INTENT_ID_RVE 0x080010DD

`INTENT_ID_BT_ENCODER_FEEDBACK`

IMCL intent ID for sending sideband data to the encoder This intent id supports two param ids:

#define INTENT_ID_BT_ENCODER_FEEDBACK 0x080010D7

`INTENT_ID_PACKETIZER_V1_FEEDBACK`

IMCL intent ID for sending the notification to the packetizer v1 to send sideband ack to BT that the primer sideband has been received by the RX RAT module.

#define INTENT_ID_PACKETIZER_V1_FEEDBACK 0x08001148

`INTENT_ID_CTM_TTY`

Intent ID for the control link between CTM Tx and Rx module.

#define INTENT_ID_CTM_TTY 0x08001191

`INTENT_ID_MUTE`

Intent ID for the control link between TTY module(1x/CTM/LTE_TTY in Rx path) and soft volume module(in Tx path).

#define INTENT_ID_MUTE 0x08001195

​Macros

​INTENT_ID_AUDIO_DAM_DETECTION_ENGINE_CTRL

​INTENT_ID_FFECNS_SVA_FREEZE

​INTENT_ID_AVC

​INTENT_ID_DRC_CONFIG

​INTENT_ID_GAIN_INFO

​INTENT_ID_P_EQ_VOL_HEADROOM

​INTENT_ID_RVE

​INTENT_ID_BT_ENCODER_FEEDBACK

​INTENT_ID_PACKETIZER_V1_FEEDBACK

​INTENT_ID_CTM_TTY

​INTENT_ID_MUTE