Dragonwing Shikra interface overview

The following table lists the device interface features in Dragonwing Shikra. Table : Dragonwing Shikra device interfaces

1xQUP v3 serial engine
Serial engine instances	QUPV3_0
Application processor QUP v3 serial engine	10
USB controller details
USB 3.0 controller (usb_1)	Base address: 0x4e00000 Maximum speed: Super Speed (USB 3.0) HS PHY: QUSB2 (0x1613000) SS PHY: QMP USB3+DP combo (0x1615000)
USB 2.0 controller (usb_2)	Base address: 0x4c00000 Maximum speed: High Speed (USB 2.0) HS PHY: QUSB2 (0x1617000)
Power rails (cqs / cqm variants)	HS PHY: pm4125_l12, pm4125_l13, pm4125_l21 SS PHY: pm4125_l8, pm4125_l13
Power rails (iqs variant)	HS PHY: pm8150_l4, pm8150_l12, pm8150_l13 SS PHY: pm8150_l6, pm8150_l12
1xPCIe controller
Root complex	RC0 (0x45e8000)
Speed	Gen2 1L (5 GT/s)
Configuration space	0x60100000 (0x100000) 1 MB
I/O space	0x60200000 (0x100000) 1 MB
Base address register space (BAR)	0x60300000 (0x3d00000) 61 MB
Power rails	VDDA_PCIE_0P9 VDDA_PCIE_1P8
Interrupts	MSI and PCI legacy interrupts
Power management	ASPM (L1/L1ss, L0s)

​

QUP v3 mapping to protocols and GPIOs in Dragonwing Shikra

Dragonwing Shikra contains 10 QUP v3 serial engines. All 10 QUP v3 serial engines are allocated for the application processor. The QUP v3 serial engines are numbered from SE0 to SE9. Select only one protocol in a QUP v3 serial engine at a time. For SE1 and SE9, the mirrored GPIO entries represent alternate GPIO pairs. Use only one GPIO pair for each lane at a time; do not use both mirror pairs simultaneously. The following table lists the default QUP v3 mapping to protocols and GPIOs. Table : Dragonwing Shikra QUP v3 serial engine protocol mapping

QUP v3 serial engine		Protocols				QUP lane to GPIO mapping
		UART	HS UART	SPI-M	I2C-M	L0	L1	L2	L3	L4	L5	L6
QUP_0	SE0	Yes	Yes	Yes	Yes	2	3	0	1	–	–	–
	SE1	Yes	–	Yes	Yes	5	4	4, 28	5, 29	–	–	–
	SE2	Yes	–	Yes	Yes	6	7	8	9	30	31	–
	SE3	Yes	–	–	Yes	10	11	11	10	–	–	–
	SE4	Yes	–	–	Yes	12	13	13	12	–	–	–
	SE5	Yes	–	Yes	Yes	14	15	16	17	–	–	–
	SE6	Yes	Yes	Yes	Yes	18	19	28	29	30	31	–
	SE7	Yes	–	–	Yes	20	21	21	20	–	–	–
	SE8	Yes	Yes	Yes	Yes	22	23	24	25	–	–	–
	SE9	Yes	Yes	Yes	Yes	27, 48	26, 49	26, 50	27, 51	–	–	–