Enable UFS device feature using kernel configuration
The following table lists the default values of the kernel configuration to enable UFS device.
Documentation Index
Fetch the complete documentation index at: /llms.txt
Use this file to discover all available pages before exploring further.
🚀 QLI Version 2.1 is now live ! Switch to new version to check out the latest content
| Configuration | Enabled by default (yes/no) | Description |
|---|---|---|
CONFIG_UFS_FAULT_INJECTION | No | Injects the failure command for debugging. |
CONFIG_SCSI_UFSHCD | Yes | Enables the UFS host control driver in the kernel. |
CONFIG_SCSI_UFSHCD_PLATFORM | Yes | Supports the UFS controller from the platform bus. |
CONFIG_SCSI_UFS_QCOM | Yes | Enables a Qualcomm-specific addition to access the PHY configuration and vendor-specific registers. |
CONFIG_PHY_QCOM_QMP | Yes | Supports UFS device QMP PHY driver. |
CONFIG_SCSI_UFS_BSG | Yes | Enables UFS device BSG device node. |
CONFIG_SCSI_UFS_CRYPTO | Yes | Supports UFS device crypto engine. |