> ## Documentation Index
> Fetch the complete documentation index at: https://dragonwingdocs-staging.qualcomm.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Overview

> Install or update Qualcomm Linux on the IQ-9075 EVK, and decide whether you need to flash.

Before you develop on the IQ-9075 EVK, make sure it is running the latest Qualcomm Linux software. This page helps you decide whether to flash, then points you to the right flashing method.

<Danger>
  **Caution:** Flashing erases all data on the device. Back up anything important before you start.
</Danger>

## Which path should I take?

<Steps>
  <Step title="First time powering on this board?">
    We recommend flashing the latest Qualcomm Linux before you do anything else, so you start from a known, current image. Continue to **[Flash the software](#flash-the-software)** below.
  </Step>

  <Step title="Have you flashed this board before?">
    If you already flashed a recent Qualcomm Linux build, you can skip flashing. Go straight to [**Set up the device**](../set-up-the-device) and verify the software version there.
  </Step>

  <Step title="Can't verify the version, or the image is too old?">
    If the device won't boot to a serial console, or the version doesn't match what you expect, the image is likely missing or outdated. Come back here and flash the latest software.
  </Step>
</Steps>

## What you need to flash

| Component | Required |
| - | - |
| Power supply (12 V) | Yes |
| USB Type-C to USB Type-A or Type-C cable | Yes (flashing) |
| Micro-USB cable | Yes (serial console access after flashing) |
| Host computer (Ubuntu, Windows, or macOS) | Yes |
| Mini DisplayPort to DisplayPort cable + monitor | Optional (display output) |
| USB mouse and keyboard | Optional (SBC mode) |
| OV9282 / IMX577 camera | Optional (CSI camera testing) |
| USB camera | Optional (USB camera testing) |

## Flash the software

Choose the method that fits how you work:

<CardGroup cols={2}>
  <Card title="Flash using Qualcomm Launcher" icon="bolt" href="./flash-using-qualcomm-launcher">
    GUI tool that downloads and flashes the image for you. Runs on Windows, Linux, and macOS. **Recommended for most users.**
  </Card>

  <Card title="Flash using QDL" icon="terminal" href="./flash-over-qli">
    Command-line tool for full control, headless hosts, or scripted/automated flashing. Host tabs for Ubuntu, Windows, and macOS.
  </Card>
</CardGroup>

## Next steps

After flashing completes, continue to [**Set up the device**](../set-up-the-device) to connect the serial console, network, and display.