> ## Documentation Index
> Fetch the complete documentation index at: https://dragonwingdocs-staging.qualcomm.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Get started with RTSS 

This section provides instructions on how to set up the infrastructure, build, and flash RTSS firmware.

\
**Prerequisites**

Before you begin, set up your infrastructure as described in [BSP image build with firmware](https://dragonwingdocs.qualcomm.com/Key-Documents/Firmware-Guide/build-firmware).

The Linux build guide describes the common build workflows and flashing instructions.

## **RTSS workflow**

\
The following figure shows the workflow to get started with RTSS on your device.

![get\_started\_with\_rtss.png](https://mintcdn.com/qualcomm-staging/nSIFiz8JJMvkhjZU/Addendum-docs/RTSS/media/get_started_with_rtss.png?fit=max\&auto=format\&n=nSIFiz8JJMvkhjZU\&q=85\&s=445172283b8f71f81648ba7d43207179)

1. For instructions about downloading and building RTSS, see [Build RTSS firmware](https://dragonwingdocs-staging.qualcomm.com/Addendum-docs/RTSS/Addendum/Build-RTSS-firmware.md).
2. For instructions about flashing RTSS, see [Flash SAIL](https://dragonwingdocs.qualcomm.com/Key-Documents/Flash-Guide/flash-with-qdl#flash-sail) in the build guide.

To validate RTSS, see [Debug RTSS](https://dragonwingdocs-staging.qualcomm.com/Addendum-docs/RTSS/Addendum/Debug-RTSS.md) and [RTSS test commands](https://dragonwingdocs-staging.qualcomm.com/Addendum-docs/RTSS/Addendum/RTSS-test-commands.md).

**Related documents:**

For supported hardware information, see [Get familiar with the board](https://dragonwingdocs.qualcomm.com/Linux/devices/iq9075-evk/device-overview) in the *Qualcomm Dragonwing IQ-9075 Evaluation Kit quickstart – Linux* documentation.

## **Next steps**

* [RTSS architecture](https://dragonwingdocs-staging.qualcomm.com/Addendum-docs/RTSS/Addendum/RTSS-architecture.md)
* [Build RTSS firmware](https://dragonwingdocs-staging.qualcomm.com/Addendum-docs/RTSS/Addendum/Build-RTSS-firmware.md)
* [Add partitions to SPINOR flash memory](https://dragonwingdocs-staging.qualcomm.com/Addendum-docs/RTSS/Addendum/Add-partitions-to-SPINOR-flash-memory.md)