> ## Documentation Index
> Fetch the complete documentation index at: https://dragonwingdocs-staging.qualcomm.com/llms.txt
> Use this file to discover all available pages before exploring further.

# IMCL SPM Intent API

**Header:** `spf/api/modules/imcl_spm_intent_api.h`

## Macros

### `INTENT_ID_AUDIO_DAM_DETECTION_ENGINE_CTRL`

Intent defines the payload structure of the IMCL message.

```c theme={null}
#define INTENT_ID_AUDIO_DAM_DETECTION_ENGINE_CTRL 0x08001064
```

### `INTENT_ID_FFECNS_SVA_FREEZE`

```c theme={null}
#define INTENT_ID_FFECNS_SVA_FREEZE 0x080010BA
```

### `INTENT_ID_AVC`

Intent ID for the control link between AVC Tx and Rx module.

```c theme={null}
#define INTENT_ID_AVC 0x080010DB
```

### `INTENT_ID_DRC_CONFIG`

Intent ID to send DRC parameters over control link.

```c theme={null}
#define INTENT_ID_DRC_CONFIG 0x080010F3
```

### `INTENT_ID_GAIN_INFO`

Intent ID for the control link to send gain information.

```c theme={null}
#define INTENT_ID_GAIN_INFO 0x080010F5
```

### `INTENT_ID_P_EQ_VOL_HEADROOM`

```c theme={null}
#define INTENT_ID_P_EQ_VOL_HEADROOM 0x08001118
```

### `INTENT_ID_RVE`

Intent ID for the control link between RVE Tx and Rx module.

```c theme={null}
#define INTENT_ID_RVE 0x080010DD
```

### `INTENT_ID_BT_ENCODER_FEEDBACK`

IMCL intent ID for sending sideband data to the encoder This intent id supports two param ids:

```c theme={null}
#define INTENT_ID_BT_ENCODER_FEEDBACK 0x080010D7
```

### `INTENT_ID_PACKETIZER_V1_FEEDBACK`

IMCL intent ID for sending the notification to the packetizer v1 to send sideband ack to BT that the primer sideband has been received by the RX RAT module.

```c theme={null}
#define INTENT_ID_PACKETIZER_V1_FEEDBACK 0x08001148
```

### `INTENT_ID_CTM_TTY`

Intent ID for the control link between CTM Tx and Rx module.

```c theme={null}
#define INTENT_ID_CTM_TTY 0x08001191
```

### `INTENT_ID_MUTE`

Intent ID for the control link between TTY module(1x/CTM/LTE\_TTY in Rx path) and soft volume module(in Tx path).

```c theme={null}
#define INTENT_ID_MUTE 0x08001195
```